b. Cleaning and Inspection.
c. Installation and Adjustment. Refer to figu
(1) Clean and dry all parts thoroughly.
15. Install and adjust the governor controls
(2) Inspect all parts for cracks, breaks, ex-
stallation procedure is reverse of removal).
cessive wear, and other damage.
NOTE
(3) Replace defective parts.
Hook the spring into the outermost of the three
holes in the governor lever.
Section XI. EXHAUST MUFFLER AND ELBOW, OIL FILLER
AND DRAIN PLUG, AND CRANKCASE BREATHER
4-27. General
(1) Refer to figure 4-5 and remove the muffler.
This section contains the maintenance in-
NOTE
Remove wire from coupler before releasing.
structions for the muffler, oil filler and drain plugs,
and the crankcase breather.
(2) Refer to figure 4-16 and remove the
4-28. Muffler, Exhaust Elbow and Crankcase
exhaust elbow male coupling half, and crankcase
Breather
breather.
a. Removal.
re 4-
(in-
Figure 4-16. Exhaust elbow and crankcase breather, removal.
4-25
