DISASSEMBLY - TM-5-4320-302-14

PISTON ASSEMBLY (CONT) - TM-5-4320-302-14_504

TM-5-4320-302-14 Forward Area Water Point Supply System (FAWPSS) Model WP55100 NSN 4320-01-168-1629 and Model 9095-91 NSN 4320-01-338-3305 Manual
Page Navigation
495

TM 5-4320-302-14 6-16. PISTON ASSEMBLY (CONT) Location/Item Action Remarks DISASSEMBLYI 3. Piston pin Remove from piston. 4. Piston rings Remove from piston and piston ring plier No. and expander 130300. Discard piston rings and expander spring. spring CLEANING/INSPECTION | WARNING Dry cleaning solvent is flammable and potentially dangerous to people and property. Do not use near open flame, sparks, excessive heat, or on hot surfaces. Flash point of P-D-680 solvent is 100° to 138° F (380 to 590C). Use solvent in a well-ventilated area, and avoid inhaling fumes. If repeatedly exposed to fumes, seek fresh air and immediate medical help. Avoid prolonged exposure of skin to solvent. Wash exposed skin immediately and thoroughly. Death or severe injury might result when compressed air is used to blow dirt from skin or clothing. Air entering body openings is extremely dangerous. Compressed air used for cleaning shall not exceed 100 psi (690 kPa). Use goggles or face shield for eye protection. Do not direct airstream against skin. 5. Piston, Clean with P-D-680 piston pin, dry cleaning solvent and piston and dry with compressed rings air. Remove carbon from piston ring lands and grooves with a wire brush. Clean inside sur- face of piston and piston skirt. Clean piston pin bore with small wire brush. 6-109

Privacy Statement
Press Release
Contact