TM 5-4320-302-14
6-8. CYLINDER HEAD ASSEMBLY, ROCKER ARMS, AND TAPPETS (CONT)
Location/Item
Action
Remarks
TEST
NOTE
Make sure piston is below TDC position. Refer to paragraph 6-4 to determine TDC
position.
10.
Piston and
Apply coating of MIL-L-10924 grease to approxi-
lead wire
mately 4.0 inches (102 mm) of 0.0787 inch
(2 mm) lead wire and mold wire to top of piston.
Grease will allow wire to adhere to piston. Trim
off wire that overlaps top of piston.
6-45
