TM 5-4320-302-14
6-5. FUEL INJECTION PUMP (CONT)
Location/Item
Action
Remarks
INSTALLATION
3.
Gasket
Install new gasket(s) and measure clearance between
fuel injection pump seating surface and lowest point
or base circle of cam. Measurement should be 3.25
0.004 inches (82.6 0.1 mm).
4.
Shims
If necessary, correct measurement with shims.
NOTE
Regardless of details given on the fuel injection pump identification plate, the
clearance between the seating surface and the lowest point or base circle of the cam
should be 3.25 +0.004 inches (82.6 +0.1 mm).
5.
Lever (on
Position to mate with fuel injection pump gover-
governor)
nor rod.
6-17
