TM 5-4320-302-14
6-4. ADJUSTMENT OF FUEL INJECTION TIMING (CONT)
Location/Item
Action
Remarks
5. Flywheel or
Rotate flywheel and
V-belt pulley
crankshaft or V-belt
pulley clockwise
(opposite normal
direction) until gage
pointer has made one
complete swing down
and back up to 0
point. Referse direc-
tion and rotate crank-
shaft counterclockwise
until gage pointer
swings down 0.1 mm
or 10 divisions on dial
gage. Mark this point
on dial gage and stop
rotating crankshaft.
6.
V-belt pulley
Mark V-belt pulley opposite marking on front cover.
If there is no marking on the front cover, make both
marks in approximately the four o'clock position in
line with each other.
6-8