TM 5-4320-302-14
Table 4-1. Organizational Preventive Maintenance Checks and Services
W-Weekly
Q-Quarterly
M-Monthly
S-Semiannually
INTERVAL
ITEM
NO.
W
M
Q
S
ITEM TO BE INSPECTED
PROCEDURES
Alternator V-Belt Pulley, Cooling Blower V-Belt Pulley, and
Drive Shaft V-Belt Pulley Check
Check all pulleys for sharp edges, nicks, corrosion, or wear
sufficient to form sharp edges on pulley outside diameters.
Check all pulleys for looseness on shafts. Check attaching
hardware for tightness and corrosion. Replace damaged
pulleys and attaching hardware.
Alternator Fan Check
Check alternator fan for broken or damaged blades which
could interfere with rotation.
V-Belt Guard Installation and Check
Install guard over V-belts and onto studs.
Place washer onto bolt. Install bolt through side of V-belt
guard. Tighten securely.
Thread cap nuts and washers onto studs. Tighten securely.
Install retainer into guard. Secure retainer in place using
bolt and nut. Tighten securely.
Place rain cap onto air cleaner. Tighten clamp securely.
4-12
