TM 5-4320-300-14Table 3-1. Operator/Crew Troubleshooting - ContinuedMALFUNCTIONTEST OR INSPECTIONCORRECTIVE ACTIONCAUTIONDo not blow out body assembly with com-pressed air. Equipment damage could resultif dust is not removed from body assemblywith damp cloth.d.Wipe body assembly, cup assembly, and baffle assembly with a da mp cloth. Insert baffle assembly intocup assembly. Reinstall filter element on air cleaner body assembly. Install wing nut and tighten.e.Reset the restriction indicator by pushing down the button on top of indicator, then start the engine. If therestriction indicator again shows red, replace the filter element.Step 4. Check for loose connections or a damaged line between fuel pump and tank, and between fuel pump and filter.Tighten loose connections. Report damaged lines to organizational m aintenance.3-9
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
