TM 5-4320-300-14
4-37. WATER PUMP (CONT)
Location/Item
Action
Remarks
5.
Mounting bolts
Remove from base of water pump.
and lockwashers
Move fuel line clip away from base
of pump.
6.
Water pump
Remove from parting surface
of oil cooler.
7.
Gasket
Remove. Scrape surface of
oil cooler as required to remove
all portions of gasket remaining
on parting surface.
INSTALLATION/REPLACEMENT
NOTE
Make sure that surfaces of pump and oil cooler that contact gasket are free of cracks and damage
that may prevent seal.
8.
Gasket
Place gasket on parting surface of oil cooler,
aline holes.
9.
Water pump
Place pump on gasket and aline holes in pump
body with those in gasket and oil cooler. Posi-
tion fuel line clip onto bolt hole, as before.
10. Mounting
Install through
bolts and
base of pump and
lockwashers
into oil cooler
threaded holes.
Make sure that
fuel line clip is
held by bolt.
Tighten securely.
11. Water bypass
Place clamp over
tube hose
hose ends. Install
onto pump and
tube. Position
clamps over ends of hose and
tighten securely.
4-148
