TM 5-4320-275-13 & P
CONNECTING ROD ASSEMBLY (CONT)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
NOTE
Position connecting rod to the down position.
1. Nuts
Use 3/4 inch socket and handle to remove nuts
(1). Remove lockwashers (2).
2. Connecting rod
Use 1-1/8 inch socket and handle to remove
assembly
shoulder bolt (4). Hand crank the engine until
connecting rod (3) is clear of the studs protrud-
ing through the diaphragm. Slide the connecting
rod assembly off crank (6).
3. Crank
Use 15/16 inch socket and handle to remove cap
screw (7). Remove lockwasher (8). Slide crank
(6) off gear reducer shaft. Remove square
key (9).
4-74
