TM 5-4320-275-13 & P
FRAME ASSEMBLY (CONT)
LOCATION/ITEM
ACTION
REMARKS
21. Engine guard
Install cap screws (1) and use a 9/16 inch socket
with a torque wrench to tighten cap screws (1)
to 30 ft lb (40 N.m). Coat threads with Loctite
and install cap screws (1).
22. Engine mount
Use a 9/16 inch wrench to hold cap screws
(1). Install lockwashers (3) and nuts (2). Use
a 9/16 inch socket with a torque wrench to
tighten nuts (2) to 30 ft lb (40 N.m).
NOTE
When engine mounts (4) are replaced, the engine must be aligned
with the coupling halves. The proper alignment is when both
coupling halves slide together freely.
4-46
