TM 5-4320-275-13 & P
Table 4-1. Operational Checks - Continued
Operation
Step
Normal Indication
Corrective Procedure
12
Check drive operation.
Operation should be smooth.
Replace noisy parts.
13
Check pump for leaks or rust.
Pump should be free of leaks and rust.
Replace defective parts.
14
Check pump output.
Pump should deliver approximately 100 gpm (38400 phr).
Clear pump inlet and outlet of obstacles.
Section IV. PREVENTIVE MAINTENANCE CHECKS AND SERVICES
4-7. PREVENTIVE MAINTENANCE CHECKS AND SERVICES
Table 4-2 lists the preventive maintenance checks and services which shall be performed at specified intervals by
organizational maintenance personnel. It includes and expands upon the preventive maintenance services performed by
operator/crew maintenance and includes additional services which are allocated to organizational maintenance.
NOTE
Item numbers in the following table shall be used as source of item numbers for the TM
Number Column on DA Form 2404, Equipment Inspection and Maintenance Worksheet, in
recording results of PMCS.
4-7
