UOC. The UOC appears in the lower left corner of the Description Column heading. Usable on codes are shown as
"UOC:..." in the Description Column (justified left) on the first line under the applicable item/nomenclature. Uncoded items
are applicable to all models.
Fabrication Instructions. Bulk materials required to manufacture items are listed in the bulk material functional group of this
RPSTL. Part numbers for bulk material are also referenced in the Description Column of the line item entry for the item to
Items which have the word BULK
figure column will have
an index number shown
in the item
number column. This index number is a cross-reference between the NSN/Part Number (P/N) Index work packages and the
bulk material list in the repair parts list work package.
HOW TO LOCATE REPAIR PARTS
1. When NSNs or Part Numbers Are Not Known.
First. Using the table of contents, determine the assembly group to which the item belongs. This is necessary since
figures are prepared for assembly groups and subassembly groups and lists are divided into the same groups.
Second. Find the figure covering the functional group or the subfunctional group to which the item belongs.
Third. Identify the item on the figure and note the number(s).
Fourth. Look in the repair parts list work packages for the figure and item numbers. The NSNs and part numbers are on
the same line as the associated item numbers.
2. When NSN Is Known.
First. If you have the NSN, look in the STOCK NUMBER column of the NSN index work package. The NSN is
arranged in NIIN sequence. Note the figure and item number next to the NSN.
Second. Turn to the figure and locate the item number. Verify that the item is the one you are looking for.
3. When Part Number Is Known.
First. If you have the part number and not the NSN, look in the PART NUMBER column of the part number index work
package. Identify the figure and item number.
Second. Look up the item on the figure in the applicable repair parts list work package.