4-4. PREPARATION FOR MOVEMENT

When connecting the tank valve cables to the tank valve control levers

SECTION III. UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

TM-10-4930-236-13P Tank and Pump Unit Liquid Dispensing; for Truck Mounting Mil Design Tank and Pump Unit Electric Motor Driven Model (97403) Manual
Page Navigation
41

TM 10-4930-236-13&P (20) Remove the dust cap (26) from receptacle J2 (27) on the junction box (37). Connect plug (28) on the intervehicle power cable (29) to receptacle J2 (27). Connect the plug (30) on the other end of cable (29) to receptacle (31) on rear of truck cab. (21) Remove dust cap (32) from receptacle J1 (33). Make sure that ON-OFF switch (34) is set to OFF, then connect plug (36) at other end of cable (35) to receptacle J1 (33) 4-4. PREPARATION FOR MOVEMENT. a. Short Distance Movement. The tank and pump unit is truck mounted and does not require dismantling for short distance movement. Move the tank and pump unit to the new worksite with the vehicle. b. Long Distance Movement. Provide suitable blocking and tiedowns to prevent the unit from shifting during transport. 4-6

Privacy Statement
Press Release
Contact