TM 10-4630-207-13&P
0026 00
1
3
2
Figure 37. Radiator Fill Cap and Drain Plug
e. Remove radiator in accordance with radiator removal procedure.
f.
Loosen and remove fan mounting bolts (figure 38, item 1).
g. Loosen generator mounting bolts (figure 39, item 1).
h. Remove fan (figure 38, item 2) and spacer (figure 38, item 3).
i.
Remove fan belt in accordance with fan belt removal procedure.
j.
Remove pulley (figure 38, item 4) by loosening and removing pulley mounting bolts (figure 38,
item 5).
k.
Loosen and remove adjust plate mounting bolts (figure 39, item 2) and adjust plate (figure 39,
item 3).
l.
Remove water pump mounting bolts (figure 40, item 1) and nuts (figure 40, item 2).
m. Remove water pump (figure 40, item 3).
n. Remove water pump cover (figure 40, item 4).
o. Clean mating surface on engine.
p. Install new cover (figure 40, item 4).
q. Install new water pump (figure 40, item 3) and seal with RTV silicone.
r.
Install water pump mounting bolts (figure 40, item 1) and nuts (figure 40, item 2).
s.
Torque water pump mounting bolts (figure 40, item 1) from 1.9 to 2.9 kg-m (13.7 to 21 ft-lbs).
t.
Torque water pump mounting nuts (figure 40, item 2) from 1.9 to 2.9 kg-m (13.7 to 21 ft-lbs).
0026 00-26
