TM 10-4630-207-13&P
0022 00
1
2
Figure 4. Replacing Gasket and Closing Manway
WARNING
The manway is heavy. To prevent injuries, two persons are required to lift the
cover off the rim.
5. While supporting the manway, remove the remaining swing bolt assemblies (figure 5, item 1) and lift
the manway (figure 5, item 2) off the rim (figure 5, item 3).
3
1
2
4
Figure 5. Replacing Gasket and Closing Manway
CAUTION
For equipment located in CONUS, use only a certified, new replacement cover to
retain DOT certification of the WWET/T.
6. Clean the edge of the manway rim (figure 5, item 4) with a rag.
7. Apply antiseize tape to the swing bolt threads (figure 6, item 1).
0022 00-4
