TM 10-4630-207-13&P
0011 00
LUBRICATION INSTRUCTIONS
GENERAL
These lubrication instructions are for unit level maintenance personnel. Lube intervals (on-condition or
hard time) are based on normal operation. Lube more during constant use, and less during inactive
periods. Use correct grade of lubricant for seasonal temperature expected.
CAUTION
Always wipe clean oil filler components before starting your lube service. Use correct type
or grade of oil. Overfilling will cause spillage and harm engine components.
1. Vacuum Pump.
To lubricate the vacuum pump, proceed as follows:
a. Lubricate the front bearing grease nipple, (figure 22, item 1) with ball bearing grease every
100 hours of operation.
b. Check and replenish vacuum pump oil as indicated by the dipstick (figure 22, item 2). Use
SAE 40 grade oil in the summer and SAE 30 grade oil in the winter.
1
2
Figure 22. Vacuum Pump
END OF WORK PACKAGE
0011 00-25/(26 Blank)
