TM 10-4630-206-12&P
0002 00
Pump 9-1-0527 (Waste Water Evacuation SEP)
A centrifugal pump is mounted in the tank and stabilized by a stainless steel support brace. The pump
used in this model is an ABS model SJ5D. The pump is rated at 150 GPM, and will operate with a
maximum head of 24-feet. The pump is powered by a hp, 208 VAC, three phase motor encased in a
stainless steel housing.
Float Switch
A float switch activates the pump when the tank contents reaches 80% of the tank's capacity.
Heating Element
A heating element is used during operations in temperatures below 320 F to prevent the tank contents
from freezing. The heating element is manually controlled by a circuit breaker on the Laundry SEP and
the General Purpose SEP. The heating element operates automatically on the Waste Water Evacuation
SEP.
DIFFERENCES BETWEEN MODELS
Two SEP tank body types are available and used with Force Provider Modules. The Laundry SEP (9-1-
0150-1) and the General Purpose SEP (9-1-0150-2) are similar, differing only in the inlet connections.
The Laundry SEP (9-1-0150-1) has two 3-inch male couplings to accommodate the wastewater discharge
from the Containerized Batch Laundry (CBL-FP). The third inlet port is closed with a plug that may be
installed in any one of the three inlet ports. The General Purpose SEP (9-1-0150-2) has three 2-inch
male couplings to accommodate inlet connections from various sources such as showers and kitchen.
There can be considerable variation in components within these two models, depending on the type of lid,
pump motor, manual drain installation, and power output receptacles fitted.
The Waste Water Evacuation SEP (9-1-0527) has been constructed to accommodate both the 3-inch
connections from the CBL-FP as well as the 2-inch connections from the showers and kitchen. It has no
parts in common with the Laundry SEP (9-1-0150-1) and the General Purpose SEP (9-1-0150-2). Early
production Waste Water Evacuation SEP's may be labeled as "Sewer Ejection System".
EQUIPMENT DATA
The following technical specifications provide separate dimensional, capacity and performance data for
the Laundry SEP (9-1-0150-1) and the General Purpose SEP (9-1-0150-2).
External dimension:
Length ............................................................................. 44-inches ......................... 111.76-centimeters
Width ............................................................................... 36-inches ........................... 91.44-centimeters
Height .............................................................................. 33-inches ........................... 83.82-centimeters
Internal dimension:
Length .......................................................................... 43.75-inches ....................... 111.76-centimeters
Width ............................................................................. 35.5-inches .......................... 91.44-centimeters
Height ........................................................................... 32.75-inches ......................... 83.82-centimeters
Storage capacity: ..............................................................230-gal ........................................... 870-liters
0002 00-3
