2.21.39 Cooling Air Blower Replacement, Models 609-C and US636HCCD-1.

TM-10-4320-344-24 Pump Assembly Water 600 GPM Model 609-A (NSN 4320-01-184-7494) Model 609-C (NSN 4320-01-261-6470) Model US636HCCD-1 Manual
Page Navigation
359

TM 10-4320-344-24 2.21.39 Cooling Air Blower Replacement, Models 609-C and US636HCCD-1. This task covers: 2.21.39.1 Removal 2 . 2 1 .3 9 . 2 I n s t a l l a t i on INITIAL SETUP Tools General Mechanic’s Automotive Tool Kit, Appendix B, Section III, Item 1 Equipment Conditions Pumping station shut down, TM 10-4320- 344-10. Bulkhead Panel Assembly removed, paragraph 2.12.15. V-belt Guard and Mounting Supports removed, paragraph 2.21.11 (US636HCCD-1). Equipment Conditions (Continued) V-belts removed, paragraph 2.21.12. General Safety Instructions Do not work on equipment that is not securely stabilized to prevent rolling o r s l i d i n g. Do not work on equipment without follow- ing standard shop safety practices. This procedure i s s i m i l a r. 2.21.39.1 Removal applies to Model US636HCCD-1. The procedure for Model 609-C Figure 2-154. Cooling Air Blower Replacement, Models 609-C and US636HCCD-1. a. Remove nut (Figure 2-154, 1), two flat washers (2), and screw (3) from cooling air blower (4). 2-348

Privacy Statement
Press Release
Contact