TM 10-4320-344-10
Item
Number
1
2
3
4
5
6
7
8
9
10
11
12
Description
PUMP DISCHARGE Gauge
PUMP SUCTION Gauge
START/STOP Knob
START Button
MODE SWITCH
Fuse
MANUAL THROTTLE
INCREASE Knob
ENGINE OIL PRESSURE
Gauge
Engine Oil Pressure
Bypass Switch
ENGINE
TACHOMETER/HOURMETER
ENGINE AMMETER
Alternator Light
Table 2-8. Description of Model US636HCCD-1 Control Panel.
Function
Displays pump water pressure at discharge outlet.
Range is 0 to 200 psi.
Displays pump water pressure at suction inlet.
Range
is -30 to 200 psi.
Enables operation of START button (4) when in START
position.
Stops engine when in STOP position.
PULL
TO START and PUSH TO STOP positions.
Used to start engine.
START/STOP knob (3) must be in
START position, then push START button in to start
engine.
Two-position toggle switch.
Used to select engine
operating mode.
Set to MANUAL for electric manual
mode.
Set to NORMAL for electric automatic mode.
Provides electrical protection for process controller
and controlling device.
Used to control engine speed in electric manual mode.
Range is IDLE to HIGH.
Displays engine oil pressure.
Range is 0 to 150 psi.
Overrides oil pressure shutoff switch when starting
engine.
Push in at same time when pushing START
button (4).
Tachometer shows engine rpm.
Range is 4 to 30 (X 100)
rpm.
Hourmeter shows amount of time engine has
operated. Displays hours and tenths of an hour.
Indicates rate of electric output by alternator.
Range is -60 to +60 amp.
Illuminates when alternator is operating.
2-13
