11. RUNNING AND BRAKE LIGHTS DO NOT WORK.

TM-10-4320-344-10 Pump Assembly Water 600 GPM Model 609-A (NSN 4320-01-184-7494) Model 609-C (NSN 4320-01-261-6470) Model US636HCCD-1 Manual
Page Navigation
140

TM 10-4320-344-10 Table 3-1. Troubleshooting Table - Continued MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION 11. RUNNING AND BRAKE LIGHTS DO NOT WORK. Check to see if intervehicular cable is securely receptacle on towing vehicle. a. Secure connection. b. Notify unit maintenance. connected to mating SECTION III. MAINTENANCE PROCEDURES 3.3 PARK BRAKE CABLE ADJUSTMENT. Figure 3-1. Park Brake Lever and Cable. To prevent rolling or sliding, do not work on equipment that is not securely stabilized. a. Raise park brake lever to unlocked position (Figure 3-1,2). DO not over tighten cable. Do not force park brake lever into lock position. Over tightening of cable or forcing park brake lever into lock position could damage cable or connecting parts. If lever will not return to lock position without force, readjust cable tension. b. Adjust cable tension as required. Turn end cap (1) clockwise to tighten cable (3), or counterclockwise to loosen it. 3-5

Privacy Statement
Press Release
Contact