Table 1-1. Nomenclature Cross-reference List.

Figure 1-3. Features of 600 GPM Pumping Assembly Model US636HCCD-1.

1.10.3 Pumping Assembly, Model US636HCCD-1

TM-10-4320-344-10 Pump Assembly Water 600 GPM Model 609-A (NSN 4320-01-184-7494) Model 609-C (NSN 4320-01-261-6470) Model US636HCCD-1 Manual
Page Navigation
5

TM 10-4320-344-10 1.7 NOMENCLATURE CROSS-REFERENCE LIST. Table 1-1 provides a cross-reference listing of the common names to official nomenclature. Table 1-1. Nomenclature Cross-reference List. Common Name Official Nomenclature Pumping Assembly Pumping Assembly, Water, 600 GPM, Model 609-A; or Pumping Assemblies Pumping Assembly, Water, 600 GPM, Model 609-C; and Pumping Assembly, Water, 600 GPM, Model US636HCCD-1 1.8 LIST OF ABBREVIATIONS/ACRONYMS. All abbreviations, acronyms, signs, and symbols used in this technical manual are listed in the glossary located in the back of the manual. 1.9 GLOSSARY. All terms used in this manual that are not defined in the text or listed in the Army Dictionary (AR 310-25) are defined in the glossary located in the back of the manual. SECTION II. EQUIPMENT DESCRIPTION 1.10.1 Pumping AssemblY, Model 609-A. 1.10.1.1 Characteristics. The Model 609-A Pumping Assembly is a diesel engine driven centrifugal pump mounted on a two wheel trailer. The trailer has two tail lights that are controlled by the towing vehicle. The trailer is equipped with an inertia-actuated hydraulic brake system. It also has a manually operated park brake for each wheel. Control of each park brake is independent of the other. The trailer has two jacks at the rear and a tongue jack at the front. The jacks prevent the trailer from tipping when disconnected from the towing vehicle. 1.10.1.2 Capabilities and Features. • Output volume: 600 gpm at 350 ft tdh. • Can be operated in manual or electric manual mode. Can be used as source pump or boost pump. 1.10.2 Pumping Assembly, Model 609-C. 1.10.2.1 Characteristics. The Model 609-C Pumping Assembly is a diesel engine driven centrifugal pump mounted on a two wheel trailer. The trailer has clearance lights and two tail lights that are controlled by the towing vehicle. The trailer is equipped with an inertia-actuated hydraulic brake system. It also has a manually operated park brakes. A single lever is used to control the park brakes on both wheels. The trailer has two jacks at the rear and a tongue jack at the front. The jacks prevent the trailer from tipping when disconnected from the towing vehicle. 1.10.2.2 Capabilities and Features. • Output volume: 600 gpm at 350 ft tdh. • Can be operated in manual or automatic mode. • Can be used as source pump or boost pump. 1-5

Privacy Statement
Press Release
Contact