TM 10-4320-344-10
2.7.2 Preparation of Pumping Assemblies for Movement.
2.7.2.1 Securing Rear Jacks for Movement.
Refer to Figure 2-36 and secure rear jacks for
movement as follows:
Figure 2-36. Secure Rear Jacks for Movement. (Model 609-A shown)
a.
Use turncranks
b.
For right side
and mounting post (4) on jack (3).
(2) to retract bottom legs (6) of both jacks (3).
jack, remove pin (5) from mounting sleeve (1) on trailer (8)
c .
Turn jack (3) to travel position (7) .
Align holes in mounting sleeve (1)
and mounting post (4).
Insert pin (5) to secure jack in travel position
( 7 ).
d .
Repeat steps b and c for left side jack.
2-115
