TM 10-4320-318-14
4-23. MAINTENANCE OF FUEL HOSES, FILTER, LINES, AND FITTINGS - (Cont)
(5) Install fuel supply hose (2) as follows:
(a) Install fuel supply hose (2) to fuel tank (8) by attaching and tightening clamp (7).
(b) Install screw (12), clamp (13), spacer (14), and fuel supply hose (2) to crankcase (17).
(c) Install socket head capscrew (9), clamp (10), spacer (11) and fuel supply hose (2) to crankcase
(17).
(d) Install strap (5) securing fuel supply hose (2) and fuel vent line (29).
(e) Install socket head capscrew (15), clamp (16), fuel supply hose (2), and fuel feed line (23) to
crankcase (17).
(9 Install banjo bolt (1) with washers (4), and fuel supply hose (2) to lift pump (3).
(6) Bleed fuel lines of air as follows:
(a) Fill fuel tank (8) with diesel fuel.
(b) Disconnect fuel vent line (27) at fuel tank (8).
(c) Activate manual primer lever (36) on fuel lift pump (3) until fuel pulsates from venting device (37).
—-
4-27
