TM 10-4320-318-14
6-10. MAINTENANCE OF CRANKSHAFT - (Cont)
f.
(c) Assemble spacer (13), ball hub (12), balls (11), and disc (10) on crankshaft (15).
(d) Mount ball shell (9) and disc (8) on crankshaft (15). Make sure ball shell (9) and disc (8) slide
easily on crankshaft (15).
INSTALL.
(1) Preheat inner race (14) to 160-175°F (70-80 °C).
(2) Install inner race (14) of governor side main bearing onto crankshaft (15).
WARNING
Wear gloves to handle heated parts. Heated parts may burn hands.
(3) Preheat crankcase (16) to 160-175°F (70-80 °C).
(4) Screw mounting device (Figure 6-17) onto crankshaft (15, Figure 6-16).
(5) Push in crankshaft with inner race and mounting device into crankcase.
NOTE
Mounting device serves as stop and automatically assures that axial play is correct.
Figure 6-17. Mounting Device
6-29
