TM 10-4320-307-24
4-6
SPEED INCREASER REPAIR.
This task covers:
a.
Disassembly
b.
Cleaning/Inspection/Repair
c.
Assembly
INITIAL SETUP
Tools
Materials/Parts (Continued)
Tool kit, general mechanic's (Item 1, Appendix B)
Lockwasher
Suitable lifting device
Cotter pins
Lifting bail T-20209 (Item 26, Appendix B)
Oil seals
Wear sleeve driver (Item 19, Appendix B)
Gaskets
Wear sleeve driver (Item 18, Appendix B)
O-rings
Drill (Item 2, Appendix B)
Snap rings
Slide hammer (Item 2, Appendix B)
Suitable blocks
Torque wrench (Item 2, Appendix B)
Equipment
Rubber hammer
Condition
Dial indicator (Item 5, Appendix B)
Reference
Condition Description
Puller (Item 32, Appendix B)
Tap and die set
Paragraph
Heat exchanger
Press
2-34
disconnected from speed
Guillotine puller
increaser
Porter power
Paragraph
Speed increaser removed
3-18
Materials/Parts
General Safety Instructions
Adhesive sealant (Item 3, Appendix C)
Well ventilated area
Dry cleaning solvent (Item 30, Appendix C)
Insure proper lifting methods and procedures
Crocus abrasive cloth (Item 1, Appendix C)
Sealant M-2828 (Item 4, Appendix C)
DISASSEMBLY:
Death or serious injury could occur if unauthorized or unnecessary
personnel are in the hoisting area. Permit only personnel actually
engaged in the hoisting operation to be near the unit and hoisting
equipment. All instructions for the hoisting operations must come from
one authorized person.
4-17
