TM 10-4320-307-24
3-28
FUEL TUBING REPAIR/REPLACE (CONT).
2.
Remove tube clamps (3) by unscrewing screw (4) from nut (5).
3.
Unscrew two screws (6) and remove lockwashers (7), plain washers (8), clips (9), mounting spacers (10), clips (11),
and mounting spacers (12).
4.
Unscrew tubing nut (13) from elbow (14), and tubing nut (15) from tee (16). Remove fuel supply tube (17).
5.
Unscrew tubing nut (18) from tee (19).
6.
Unscrew tubing nut (20) from elbow (21), and tubing nut (22) from elbow (23). Remove fuel drain tube (24), tee
(19), and fuel bypass tube (25).
7.
Remove fuel drain tube (24) and fuel bypass tube (25) from tee (19).
8.
Unscrew and remove elbows (14, 21, and 23).
9.
Remove pipe plug (26) from tee (16) and remove tee with nipple (27).
10.
Tag and disconnect wiring from pressure switch (28) and remove pressure switch from tee (29).
11.
Remove tee (29) with nipple (30).
12.
Plug four connection points where elbows and tee have been removed to prevent dirt from entering system.
3-89
