TM 10-4320-307-24
2-45
THERMOSTAT HOUSING ASSEMBLY REPAIR/REPLACE. (CONT) .
b.
Slide the sleeve of thermostat (3) through seal in housing (2).
c.
Position thermostat gasket (4) against water manifold (5).
d.
Insert four capscrews (6) and fasten housing (2) to water manifold (5).
2.
Install water connection (7) as follows:
a.
Place gasket (8) in place on housing (2).
b.
Install two capscrews (9) and fasten water connection (7) to housing (2).
3.
Install water bypass tube (10) as follows:
a.
Coat new O-ring seal (11) with GM grease and install.
b.
Insert bypass tube into housing.
c.
Install plain hose (12) to thermostat housing (2) and bypass tube (10) and fasten with two hose clamps (13).
Tighten hose clamps to 40 in-lbs (5 N•m) torque.
d.
Install capscrew (14) and clamp (15).
2-186
