TM 10-4320-226-145.8.1 Removal.To prevent rolling or sliding, do not work on equipment that isnot securely stabilized.Ensure both wheels are secure.Failure to obey this warnings may result in serious personalinjury.a.Raise unit clear of ground and adequately support with jack stands.b.Adequately support axle assembly to prevent it from dropping when attachinghardware is removed.Do not remove bolts securing top bracket to base bracket.Coilsprings are under high tension.Failure to obey this warningsmay result in serious personal injury.c.Remove four nuts (figure 5-17, 1) lockwashers (2), washers (3), bolts (4),washers (5) and beveled washers (6).d.Axle assembly (7) is now free from frame.Remove axle assembly (7) fromsupports and move free of frame.5.10.2.2 Installation.a.With frame positioned on assembly stand, raise axle assembly (7) into positionunder frame.b.Install beveled washers (6), washers (5), bolts (4), washers (3),lockwashers (2), and nuts (1).5-48
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
