TM 10-4320-226-14
4.16.6.1 Removal.
a.
To prevent rolling or sliding,
do not work on equipment that is not
securely stabilized.
Ensure both wheels are secure.
Do not lift heavy assemblies without lifting device.
Failure to obey these warnings may result in personal injury or death.
Open lid of tool box (4).
b.
Remove three nuts (figure 4-62, 1), lockwashers (2), and bolts (3) that secure
tool box (4).
c.
Remove tool box (4).
4.16.6.2 Installation.
a.
Open tool box (4) and align mounting holes.
b.
Insert three bolts (3) through mounting holes.
c.
Install lockwasher (2) and nut (1) on each bolt (3).
4-116
