TM 10-4320-226-144.10.24.1 Removal.a.b.c.d.e.4.10.24.2 Installation.To prevent rolling or sliding, do not work on equipment that isnot securely stabilized.Ensure both wheels are secure.Failure to obey this warning may result in serious personalinjury.Tag and disconnect V-belt contact switch wires (figure 4-34, 1).Remove spacer (2).Hold pulley (3) and remove bolt (4) and contact switch bracket (5).Remove nut (6), washer (7), bolt (8), washer (9) and idler pulleyassembly (10).Remove and discard preformed packing (11).a.Install new preformed packing (11).b.Position idler pulley assembly (10) in place on engine and installwasher (9), bolt (8), washer (7), and nut (6).c. Raise pulley (3) and install contact switch bracket (5) with bolt (4).d.Install spacer (2).e.Connect V-belt contact switch wires (1).4-64
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
