TM 5-4320-302-14
(e) Remove nut assembly from threaded rod.
(f) Remove and discard primary element.
(g) Remove nut assembly from threaded rod.
(h) Remove and discard secondary element.
(i) Wipe out interior of body assembly with a clean, dry cloth.
(2) Installation.
(a) Install secondary element into body assembly.
(b) Aline hole in element with threaded rod.
Hand tighten nut assembly as necessary to make a tight, vibration-free installation.
Overtightening will deform the element.
(c) Install nut assembly and hand tighten.
(d) Install primary element over secondary element.
(e) Aline hole in element with threaded rod.
2-65