TM 5-4320-302-14
6-16.
PISTON ASSEMBLY (CONT)
Location/Item
Action
Remarks
30.
Piston, con-
a.
Insert connecting rod into bottom of piston and
necting rod,
place piston on two flat wooden blocks. Insert
and piston
piston pin into piston pin bore and through
pin
small-end bush of connecting rod. Push pin in
until it contacts installed circlip and stops. Make
sure arrow on top of piston points toward push-
rod cover tube bores (inlet and exhaust side).
b.
Install new circlip.
Install new circlip.
6-122