TM 5-4320-302-14
6-14.
DRIVE SHAFT (CONT)
Location/Item
Action
Remarks
11. Carrier plate
Inspect carrier plate and screws for damage, rust, corrosion, or stripped threads.
Replace if necessary. Measure carrier plate bore. Bore should be 1.4550 to 1.4555
inches (36.955 to 36.971 mm). If bore is larger, replace carrier plate.
12. Guide plate
a.
Inspect for excessive wear, damage, rust, or corrosion. Inspect cutouts for
excessive wear. Replace if necessary.
b.
Inspect hex bolts and spring lockwashers for damage or wear. Replace if necessary.
13. Dowel sleeve
Replace.
6-91