TM 5-4320-302-14
6-7. FRONT COVER (CONT)
Location/Item
Action
Remarks
17.
Stop lever
a. Before replacement or adjustment, measure
threaded
distance between stop lever threaded pin and
pin
front cover casting. Record measurement.
NOTE
Following replacement or adjustment of stop lever threaded pin, be sure to reset
engine power lever on test stand.
b.
If replacement is necessary, unthread inward,
remove and thread in new pin from inside
front cover. When installing new pin, thread
on to measurement recorded above.
18.
Threaded
a.
Install hex nut and copper washers and tighten
bush
securely to maintain clearance of stop lever
threaded pin.
NOTE
Always use, copper washers with hex nut.
b.
Thread threaded bush onto stop lever threaded
pin. Add copper washers to compensate for
clearance between bush and nut.
6-28