INTERVAL
TM 5-4320-302-14
Table 2-2. Operator/Crew Preventive Maintenance Checks and Services-Continued
B BEFORE OPERATION
A AFTER OPERATION
M MONTHLY
D DURING OPERATION
W WEEKLY
B
D
A
W
M
11
Starter.
Evidence of
binding, over-
During starting, pinion and flywheel engagement is
heating, or
smooth and quick, and no arcing is seen at
failure of
connections.
pinion to prop-
erly mate with
NOTE
flywheel.
Pinion is driven by relay (solenoid) located
above exciter winding and attached to drive
bearing.
Visually inspect for excessive vibration.
Listen for noisy operation.
Observe starter operation for evidence of binding,
looseness, or overheating.
ITEM
NO.
ITEM TO BE INSPECTED
PROCEDURE
EQUIPMENT IS NOT
READY/AVAILABLE IF:
2-22