TM 5-4320-302-14
5-19.
ALTERNATOR (CONT)
Location/Item
Action
Remarks
9.
Drive bearing
Carefully remove from bearing support. Remove
with rotor
spring washer and O-seal. Discard O-seal.
CAUTION
If bearing support and drive bearing do not come
apart easily and a screwdriver is used to pry them
apart, be extremely careful not to insert screwdriver
past inner lip of either side. If screwdriver is
inserted too far, the columix (stator windings) will
be damaged.
10. Rotor
Press out of drive bearing with arbor press while
holding rotor securely.
5-65