TM 5-4320-302-14
5-18.
STARTER MOTOR
This task covers:
a. Test
d.
Assembly
b. Disassembly
e.
Final Test
c. Cleaning/Inspection/Repair
INITIAL SETUP
Test Equipment
Materials/Parts
Battery (12V)
Dry cleaning solvent (Item 16, Appendix E)
Rosin flux core solder (Item 15, Appendix E)
Starter switch w/leads
Troubleshooting Reference (Table 5-1)
Tools
Malfunction 1, step 1
Shop set, automotive repair,
Equipment
field maintenance, basic
Condition
NSN 4910-00-754-0705
Para
Condition Description
Tool kit, master mechanics
4-37
Starter motor removed from
NSN 5180-00-699-5273
engine.
Location/Item
Action
Remarks
TEST
CAUTION
Under no-load condition the starter will exceed safe
RPM's.
1.
Starter
Connect starter in series with a fully charged 12-volt
battery and connect a remote starting switch as shown.
Energize starter by momentarily depressing switch;
observe whether pinion moves forward and begins
rotating at a high rate of speed. If it does not, consult the
following symptom chart.
5-53