TM 5-4320-302-14
5-7. ENGINE ASSEMBLY (CONT)
Location/Item
Action
Remarks
b. Remove hex head cap screws, lockwashers, and
hex nuts from both sides of engine and engine
mounts on skid assembly.
c. Lift engine assembly from skid assembly and
lower onto blocks on a stable, level work
platform.
INSTALLATION/REPLACEMENT
WARNING
Make sure that hoists and other lifting equipment are in
good repair and of sufficient capacity to safely handle
loads without injury to personnel or damage to equip-
ment. Securely attach lifting equipment to engine assem-
bly. Before lifting, be sure load is balanced.
2. Engine
a. Attach lifting equipment. Lift and carefully
assembly
lower engine assembly onto engine mounts on
skid assembly.
b. Install hex head cap screws, lockwashers, and
hex nuts and tighten securely.
5-25