INTERVAL
TM 5-4320-302-14
Table 2-2. Operator/Crew Preventive Maintenance Checks and Services-Continued
B BEFORE OPERATION
D DURING OPERATION
A AFTER OPERATION
W WEEKLY
M MONTHLY
B
D
A
W
M
4
Lifting Bracket.
Equipment must
be lifted, and
Check that hex head cap screws are tight and not
lifting bracket
corroded.
weldment con-
dition prohibits
Check for cracks in base metal and/or welds.
a safe lift.
Check 3-inch diameter hole for wear and cracks.
Check for corrosion, especially at mating areas.
Check condition of paint. Paint shall be in good
condition with no bare metal or corrosion. Bare or
corroded metal shall be refinished as soon as possible
in accordance with MI L-T-704.
ITEM
NO.
ITEM TO BE INSPECTED
PROCEDURE: CHECK FOR AND HAVE REPAIRED,
FILLED, OR ADJUSTED AS NEEDED
EQUIPMENT IS NOT
READY/AVAILABLE IF:
2-12