TM 5-4320-302-14
4-29.
DRIVE SHAFT V-BELT PULLEY (CONT)
Location/Item
Action
Remarks
REMOVAL
1.
Drive shaft
a.
Remove bolt and washer.
V-belt pulley
b.
Remove drive shaft V-belt pulley from
drive shaft using gear puller.
c.
Replace unit if damaged.
2.
Shaft
Remove key.
REPLACEMENT
3.
Shaft
Install key.
4.
Drive shaft
a.
Install drive shaft V-belt pulley onto drive
V-belt pulley
shaft, alining slot in pulley with key on drive
shaft.
b.
Install bolt and washer. Tighten to 66 ft lb
(90 N.m) using torque gage.
5.
V-belts
Install, test, and adjust V-belts over pulleys in
accordance with paragraph 4-27.
6.
V-belt guard
Install and tighten securely in accordance with
paragraph 4-26.
4-141