TM 5-4320-302-14
4-27.
V-BELTS (CONT)
Location/Item
Action
Remarks
2.
V-belts
Remove. Inspect for worn or frayed edges;
brittle, cracked, or broken rubber. If replace-
ment is necessary, replace as a matched pair.
REPLACEMENT
3.
V-belts
Install new pair over V-belt pulleys.
4.
Alternator
a.
Carefully push away from engine centerline
When thumb pres-
and clamp-
until V-belt tension is correct.
sure is applied to
ing plate
V-belts, a deflec-
b.
Tighten screw and hex bolt securely.
tion of 3/8-5/8
inch (9.5-15.9 mm) is
required.
4-135