TM 5-4320-300-14
5-16. ENGINE ASSEMBLY (CONT)
Location/Item
Action
Remarks
26. Instrument
Connect to control
and switch
panel light switch,
connecting
battery disconnect
wires
switch, start push-
button, and am-
meter. Tighten
terminal nuts
securely. Remove
tags.
27. Suction and
Attach lines to con-
discharge
nectors at rear of
gage lines
gages. Tighten con-
nectors; remove
tags.
28. Water tem-
Route capillary (with
perature
sender attached) to
sender and
thermostat housing.
capillary
Install sender and
tighten. Install new
tie wraps to hold
capillary in place.
29.
Oil pressure
Route assembly from
gage tube
control panel down
assembly
to fitting on engine
block. Remove plug
and install tube as-
sembly connector
in fitting. Install new
tie wraps.
5-65