TM 5-4320-300-14
5-6. STARTER MOTOR ASSEMBLY (CONT)
Location/Item
Action
Remarks
g. overspeed governor
h. START pushbutton
NOTE
For ease of replacement, mark route of main wiring harness with string before removing tie wraps
and harness. Cut all tie wraps securing main wiring harness to fuel lines, water temperature gage
capillary, or other attachment points.
2. Main wiring
Carefully remove main wiring harness from engine.
harness
If connecting wires on replacement harness are
not tagged, transfer tags to the same connecting
wires on replacement harness.
5-20