TM 5-4320-300-14
4-41.
CONTROL (INSTRUMENT) PANEL ASSEMBLY, I NSTRUMENTS, AND
SWITCHES (CONT)
Location/Item
Action
Remarks
8.
PULL TO
Disconnect control wire clamp by removing
STOP
mounting screw. Remove control wire from wire
handle
stop. Loosen mounting nut at back of PULL TO
STOP
handle mounting, and slide nut off con-
trol wire. Remove handle and control wire from
front of panel.
9.
Pressure or
Tag and disconnect lines.
suction gage
Remove mounting screws,
nuts, and lockwashers.
Remove gage from front
of panel.
4-165