TM 5-4320-275-13 & P
c. Check fuel filter bowl for accumulations of dirt.
(1) Turn shutoff valve in to OFF.
(2) Loosen nut on bail of fuel filter.
(3) Swing bail aside and remove fuel bowl.
(4) Dump fuel from bowl and wipe bowl.
(5) Reposition fuel bowl and bail.
(6) Tighten nut on bail.
(7) Turn shutoff valve out to ON.
2-14. OPERATION UNDER RAINY OR HUMID CONDITIONS
a. Fill the fuel tank immediately after every operating period to prevent moisture in the air from condensing and
entering the fuel system. Check the fuel filter bowl frequently for collection of moisture.
b. Take special care to prevent rust and corrosion of exposed metal surfaces.
2-15. OPERATION IN SALT WATER AREAS
a. Salt water causes corrosion. Use fresh water to wash off any salt water that comes in contact with the
equipment. This will help prevent the formation of rust and corrosion.
b. Take special care to prevent rust and corrosion of exposed metal surfaces.
2-12