TM 5-4320-200-13 & P
b.
Figure 4-2.
Fuel Line and Filter Removal,
Cleaning and Inspection.
Drycleaning solvent, P-D-680, used to clean
parts is potentially dangerous to personnel
and property.
Avoid inhalation of fumes
and repeated or prolonged skin exposure.
Wash exposed skin thoroughly with soap and
water.
Use in well ventilated area away
from open flame or excessive heat.
Flash
point is 100°F (38°C).
(1) Clean fuel filter, bowl assembly and fuel lines with
approved cleaning solvent and dry thoroughly.
(2) Inspect fuel filter, connector threads, bowl, and bowl
gasket for cracks, breaks, and other damage.
(3) Inspect fuel lines for cracks, distortion, or other
damage.
(4) Replace all damaged or defective parts.
c.
Installation.
Using figure 4-2 repeat the removal procedure in reverse
sequence.
4-4
Change 4