Drill Operator Control Panel - WWDR - Continued.
Displays the air pressure inside the air receiver tank for the on-deck
Illuminates when transfer case has shifted into position that allows rotation
torque to be applied to the compressor drive shaft when truck clutch is
Used to close the compressor's intake valve to enable easier starting of the
compressor when engaging to engine.
Used to engage the compressor. Set switch to ENGAGE (up) position to
engage the compressor and DISENGAGE (down) to disengage the
Used to regulate the air pressure the compressor can build. Maximum air
pressure is 350 psi (2413 kPa).
Used to select a maximum air compressor output pressure.
Illuminates and engine shuts down when compressor oil temperature
exceeds manufacturer's recommended value.