Do not attempt to replace the connecting rod or motor bearings. If after cleaning the unit and/or in
stalling a new Service Kit, the unit still does not operate properly, contact Millipore Corporation,
Technical Services or Order Service Department.
S P E C I F I C A T I O N S
Materials: Die cast aluminum body and pump-head, Armalon+covered neoprene diaphragm, Hypalon
head-gasket, polyurethane filters, and high grade S.S. leaf valves. All internal pump surfaces are
Power: Shaded-pole, Single phase, 1/8 HP, 115V 60 Hz AC, 100V, 50/60 Hz AC, or 220/240V 50 Hz AC,
depending on model.
This pump is not explosion proof.
Connections: 3-conductor (grounded] cord and plug. Tapered 1/4 inlet and outlet hose connectors.
Cord for 220V unit is European coded.
Dimensions: 7 5/8L (20cms) X 7 1/8W (18cms) X 11"H (28cms) overall.
Weight: Approximately 20 lb (9 Kg) boxed.
Flow Rates: Air flows at different vacuum and pressure settings are given below. For vacuum operation,
pump exit pressure is 1 atmosphere (14.7 psi).
T E C H N I C A L I N F O R M A T I O N
For further information call our Technical Services
Department tollfree at 800-225-1380
In Western States 800-632-2708
In Massachusetts 617275-9200
in Canada 800-268-4881
in Alaska& Hawaii 415952-9200
Outside of the U. S.A., contact your nearest Millipore office or agent listed in the Millipore catalogue.
Millipore is a registered trademark al Millipore Corporation.
Teflon, Armalon, and Hypalon are registered trademarks of E.l. Dupont de Nemours Co.
12040 OM 109 Rev 1/86