Discard all mandatory replacement parts.
Remove nuts (1), lockwashers (2), bevel washers (3), flat washers (5) and screws (4).
Drain fuel from pump by removing plug (6). Install plug.
When an item cannot be lifted with ease, use two or more people to prevent injury.
Remove the EMD pump assembly (7) from the pump unit A-Frame.
Set the EMD pump assembly (7) on pump unit A-Frame.
Install screws (4), flat washers (5), bevel washers (3), lockwashers (2) and nuts (1). Torque to 50-55
ft.-lbs. (67.8 -74.6 Nm).
Refer to paragraph 4-8 to install hoses.
Connect power cable and ON-OFF cable to junction box.
Operate pump to check for proper operation.