Repeat above steps for each of the other tie downs on tanks.
Use tiedown strap assembly (12) to attach a tiedown bracket (9) between each side of truck and
tiedown link at top of pumping assembly A-Frame (16).
When connecting the tank valve cables to the tank valve control levers, make
sure the front tank valve control cable is connected to the control lever on the
Remove the nut (17) from the cable adjusting bolt (18) on the front tank valve control lever (19)
Maneuver the cables (20) through the hole in the A-Frame (16) then through the bushings (21).
Push the valve control lever (19) forward to the OFF (tank valve closed) position.
Slide the nut (17) over the tank valve cable (20). Pull the cable (20) taut, and position the cable
(20) in the groove in the cable adjusting bolt (18). Hold the cable (20) in position, and screw the nut (17) onto
the cable adjusting bolt (18), tightly enough to ensure that the cable (20) does not slip.
Connect the tank valve control cable from the rear tank valve to the rear tank valve control lever
(22) by repeating steps 14 thru 17.
Connect the hose from the forward tank valve to the forward tank connection (23) on the bottom
loading manifold (25), then connect the hose from the rear tank valve to the rear tank connection (24) on the
bottom loading manifold (25).